The dot physical vision requirements come from one federal rule, 49 CFR 391.41(b)(10). You need 20/40 vision in each eye, with or without glasses or contacts, a wide enough field of vision, and the ability to recognize red, green and amber. Since 2022, drivers who cannot meet this with one eye have a second path.
Quick answer
What are the DOT physical vision requirements?
Under 49 CFR 391.41, a commercial driver needs at least 20/40 vision in each eye and both eyes together, with or without corrective lenses, a 70 degree field of vision in each eye, and the ability to recognize red, green and amber. Drivers who fall short in one eye may qualify under 49 CFR 391.44.

What are the DOT physical vision requirements?
The Federal Motor Carrier Safety Administration (FMCSA) sets three vision tests for interstate commercial drivers. The examiner records each one on the Medical Examination Report Form, MCSA-5875.
- Sharpness: at least 20/40 (Snellen) in each eye and with both eyes together. Glasses or contacts may be used.
- Field of vision: at least 70 degrees in the horizontal meridian in each eye, meaning how far you see to the side while looking ahead.
- Color: the ability to recognize traffic signal colors, standard red, green and amber.
Vision is one of 13 physical standards. See all the FMCSA physical standards in one table, or read each step of a DOT physical.

How the examiner tests your vision
FMCSA’s Medical Examiner’s Handbook (2024 Edition) says the Snellen chart and the Titmus Vision Tester both measure distance vision. For side vision, examiners often use a confrontation test: you cover one eye, look at the examiner, and count fingers held out to the side.
Under 49 CFR 391.43, a licensed ophthalmologist or optometrist may do the vision part of the exam. The certified medical examiner still makes the decision.
Glasses and contact lenses
If you need glasses or contacts to reach 20/40, the handbook says you must wear them while driving, and your certificate will say so. Contacts are allowed if you are well adapted to them, even one lens for distance and one for near, as long as you meet the standard. Bioptic telescopic lenses are not allowed for commercial driving.

Can you pass a DOT physical if you are color blind?
It depends on what you can recognize. FMCSA’s handbook says a driver who can recognize standard red, green and amber meets the color part, even with some color perception deficiency. Examiners may use a standard test, such as the Ishihara, Farnsworth or yarn tests, or the red, green and amber colors on a chart. A driver who cannot recognize those signal colors does not meet the standard under either path.
The National Eye Institute (NEI) says most people with color vision deficiency are born with it, and the most common type makes red and green hard to tell apart. NEI says about 1 in 12 men have it.

Can you get a DOT card with one eye? The alternative vision standard
Possibly. FMCSA’s vision final rule of January 21, 2022 created the alternative vision standard in 49 CFR 391.44. It covers drivers whose worse eye cannot meet the distance standard with corrective lenses, the field of vision standard, or both. The handbook says it does not apply if lenses can bring the worse eye to 20/40.
The rule replaced the old Federal Vision Exemption Program. Certificates issued with a vision exemption became void on March 22, 2023.
| Item | 391.41(b)(10) | 391.44 alternative |
|---|---|---|
| Acuity | 20/40 each eye and both eyes | 20/40 in the better eye |
| Field of vision | 70 degrees each eye | 70 degrees in the better eye |
| Red, green, amber | Required | Required |
| Eye doctor report | Not required | Form MCSA-5871 before each exam |
| Longest card | 24 months | 12 months |
The examiner must also find that your vision problem is stable and that enough time has passed for you to adapt. The rule sets no number of weeks.
How the one-eye path works
- A licensed ophthalmologist or optometrist examines you and completes Form MCSA-5871, including a formal field of vision test with a printout.
- Your DOT physical must begin no more than 45 days after the eye doctor signs and dates the form.
- A certified medical examiner reviews the report, examines you and decides.
- The handbook says the card lasts 12 months at most. See why some drivers get a 1-year card.
- First-time drivers under 391.44 need a road test from the motor carrier before driving.
The road test is skipped if you held a federal vision exemption on March 22, 2022, or if the carrier finds you drove a commercial vehicle with the same vision problem in intrastate or excepted work for the prior 3 years.

What happens if you do not meet the vision standard at the exam?
FMCSA’s handbook says the examiner should send you to an ophthalmologist or optometrist, and must not place you in “determination pending” while you wait. If the one-eye standard may fit, the eye doctor completes Form MCSA-5871 and you have a new DOT physical.
Pending status, with up to 45 days to send details, is allowed only once you bring a completed MCSA-5871, and it does not extend your current card. Read what happens after a deferred or failed DOT physical.

Eye health between DOT physicals
NEI says refractive errors, such as nearsightedness, are the most common vision problem, and blurry vision is the most common sign. The handbook tells examiners to ask about vision changes, night vision, cataracts, glaucoma and retinopathy, so bring your eye doctor’s records. Our full list of what to bring to a DOT physical covers the rest.
Frequently asked questions
Do I need to bring my glasses to a DOT physical?
Yes. The standard can be met with glasses or contacts, so bring what you drive with. FMCSA’s handbook says if you need them to meet the standard, you must wear them while driving, and your medical certificate will show that you wear corrective lenses.
Can I wear contacts for the DOT eye test?
Yes. FMCSA’s handbook allows contact lenses when you are well adapted to them, including one lens for distance and one for near vision if you still meet the standard. Bioptic telescopic lenses are not allowed. The examiner decides whether you meet the standard.
Is there still a DOT vision waiver?
No. FMCSA’s 2022 vision rule replaced the Federal Vision Exemption Program with the alternative vision standard in 49 CFR 391.44. Certificates issued with a vision exemption became void on March 22, 2023. Drivers with one weak eye now bring Form MCSA-5871 instead.
How long is a DOT card under the alternative vision standard?
FMCSA’s handbook says 12 months at most, citing 49 CFR 391.45(f). Under 391.44 you must be examined at least once a year, and you need a newly signed Form MCSA-5871 from your eye doctor before each exam.
Who fills out Form MCSA-5871?
A licensed ophthalmologist or optometrist completes, signs and dates it, under 49 CFR 391.44. Your DOT physical must begin no more than 45 days after it is signed. A certified medical examiner then decides whether you meet the standards.
Noticed a change in your vision?
Blurry vision or trouble seeing at night is worth checking before your DOT physical. Contact our office to schedule a visit or ask about your records.
Next, see how FMCSA handles the DOT physical hearing test and hearing aids.
Sources
- Code of Federal Regulations, 49 CFR 391.41 and 391.43 (govinfo.gov, 2025 edition), checked November 21, 2026.
- Code of Federal Regulations, 49 CFR 391.44, the alternative vision standard, checked November 21, 2026.
- FMCSA, “Medical Examiner’s Handbook 2024 Edition,” checked November 21, 2026.
- FMCSA, “Vision Evaluation Report, Form MCSA-5871” (updated April 1, 2025) and “Medical Examination Report Form, MCSA-5875,” checked November 21, 2026.
- National Eye Institute, “Color Blindness” and “Refractive Errors,” checked November 21, 2026.
This article is general health information, not medical advice, and does not replace a visit. If you think you have an emergency, call 911. For questions about your own health, contact your doctor’s office.

